Jump to content


Photo

Tools needed for 10//22 Power Custom trigger install?


  • Please log in to reply
10 replies to this topic

#1 Willfully armed

Willfully armed

    .22

  • Members
  • Pip
  • 24 posts
5
  • LocationOlathe ks

Posted 02 March 2017 - 01:20 PM

So, I have very little tooling at the new house, my 6' Matco box, along with 99.99% of my tools is 20 miles away at the shop.

Add the fact that this will be my first 10/22 trigger, on my first 10/22 That I've had for a week.... I'm unfamiliar with their innards.

Now, give me a glock and $12 worth of parts, and ill give you a 2# trigger.... im just 10/22 dumb, not gun dumb.
Logan Sell

#2 Bjlffire1

Bjlffire1

    .380

  • Members
  • PipPip
  • 58 posts
28
  • LocationHannibal,MO

Posted 02 March 2017 - 02:41 PM

Pretty straight forward, I did not need anything special just a punch to knock out the pins.

If you have any trouble you can call Power Customs great folks here in Missouri



#3 Steve McGinley

Steve McGinley

    Consistently Inconsistent

  • Members
  • PipPipPipPipPipPip
  • 2,712 posts
587
  • LocationYukon, OK

Posted 02 March 2017 - 02:43 PM

YouTube


Steve
NRA Life Member

Leave Feedback Here: My Feedback


#4 Willfully armed

Willfully armed

    .22

  • Members
  • Pip
  • 24 posts
5
  • LocationOlathe ks

Posted 02 March 2017 - 03:50 PM

I ended up having to call PC, as the sear was missing from the kit, and theyre sending me one.

So it currently has the PC return spring, hammer, sear and hammer spring. Favtpry trigger and sear, as the PC trigger wont work with the factory sear.

3# pull with minor creep
Logan Sell

#5 PeteMcGuire1881

PeteMcGuire1881

    .380

  • Members
  • PipPip
  • 162 posts
98
  • LocationIndiana

Posted 02 March 2017 - 05:20 PM

I used weed eater line to slide in as you are putting everything back together. Doesn't fit as tight and you can push it out with the pin.


Sent from my iPhone using Tapatalk

#6 Willfully armed

Willfully armed

    .22

  • Members
  • Pip
  • 24 posts
5
  • LocationOlathe ks

Posted 02 March 2017 - 06:38 PM

I used weed eater line to slide in as you are putting everything back together. Doesn't fit as tight and you can push it out with the pin.


Sent from my iPhone using Tapatalk


The kit comes with slave pins to do just that.
Logan Sell

#7 PeteMcGuire1881

PeteMcGuire1881

    .380

  • Members
  • PipPip
  • 162 posts
98
  • LocationIndiana

Posted 02 March 2017 - 06:39 PM

The kit comes with slave pins to do just that.


Oh, cool. When I replaced years ago there wasn't anything like that.


Sent from my iPhone using Tapatalk

#8 MikeF

MikeF

    9 mm

  • Members
  • PipPipPip
  • 402 posts
129
  • LocationTulsa, OK

Posted 02 March 2017 - 10:02 PM

Those power customs kits are a pretty nice upgrade for the 10/22. I don't Remember mine taking many more tools than a punch and a couple beers.

#9 Keepkool

Keepkool

    9 mm

  • Members
  • PipPipPip
  • 207 posts
25
  • LocationLevittown, N.Y.

Posted 10 March 2017 - 09:48 PM

You should be able to do the job with a allen key



#10 SGW Gunsmith

SGW Gunsmith

    .22

  • Members
  • Pip
  • 5 posts
5
  • LocationNorthwestern Wisconsin

Posted 07 November 2017 - 12:45 PM

Pretty straight forward, I did not need anything special just a punch to knock out the pins.

If you have any trouble you can call Power Customs great folks here in Missouri

But don't forget, you need to have just the tip of yer tongue sticking out of the left side corner of your mouth, but just a little bit.  :o



#11 PeteMcGuire1881

PeteMcGuire1881

    .380

  • Members
  • PipPip
  • 162 posts
98
  • LocationIndiana

Posted 07 November 2017 - 03:53 PM

I’m not sure the particulars on that trigger whether it’s a drop in or not. Mine wasn’t so I used a little weed eater line that was a touch smaller than the pins to line everything up then slid the pins in as the line slid out. Made it a little easier.


Sent from my iPhone using Tapatalk




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users