Jump to content


Photo

WTB Versamax factory buttstock


  • This topic is locked This topic is locked
4 replies to this topic

#1 Brandon Deem

Brandon Deem

    9 mm

  • Members
  • PipPipPip
  • 228 posts
47
  • LocationKaty Texas

Posted 24 April 2017 - 12:43 PM

Looking for the factory ADJUSTABLE buttstock for the versamax. Anyone switch to a pistol grip or something and have one laying around?

Sent from my HTC6545LVW using Tapatalk

#2 B. Rigsby

B. Rigsby

    .22

  • Members
  • Pip
  • 40 posts
5
  • LocationSugar Land, Texas

Posted 25 April 2017 - 03:46 PM

Brandon, would the stock you have work with either of the cast plates for the Versamax? Looks like there are two different ones available.

 

http://www.gunpartsc...2892.htm?page=3

 

Good shooting with you last weekend at the Vortex match!



#3 Brandon Deem

Brandon Deem

    9 mm

  • Members
  • PipPipPip
  • 228 posts
47
  • LocationKaty Texas

Posted 25 April 2017 - 03:51 PM



Brandon, would the stock you have work with either of the cast plates for the Versamax? Looks like there are two different ones available.

http://www.gunpartsc...2892.htm?page=3

Good shooting with you last weekend at the Vortex match!


Those plates are part of it. The other is #31, it's the plate that mates the stock to the receiver. Mine is flat on both sides. The adjustable one is flat on one and ball and socket on the other. I believe the front of the stock is different too. Thanks for looking into it.

Really nice shooting with you too.


Sent from my HTC6545LVW using Tapatalk

#4 B. Rigsby

B. Rigsby

    .22

  • Members
  • Pip
  • 40 posts
5
  • LocationSugar Land, Texas

Posted 26 April 2017 - 08:05 AM

So you need Remington part number F405345? The black synthetic stock with the over molded rubber? If that's the one, looks like Brownells has them in stock if you don't find a take off somewhere.



#5 Brandon Deem

Brandon Deem

    9 mm

  • Members
  • PipPipPip
  • 228 posts
47
  • LocationKaty Texas

Posted 26 April 2017 - 08:16 AM

So you need Remington part number F405345? The black synthetic stock with the over molded rubber? If that's the one, looks like Brownells has them in stock if you don't find a take off somewhere.

Cool thanks, I was just trying to save some money. Someone out there has one laying on a shelf collecting dust.

Sent from my HTC6545LVW using Tapatalk




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users